|
|
Removable RIPS standard back - Code
–
RIPS/R/D/400 - Click
here to enquire
Removable RIPS narrow back - Code
–
RIPS/R/D/280 - Click
here to enquire
Removable RIPS extending back - Code
–
RIPS/R/D/EXT/4 - Click
here to enquire
All
Removable Rips locate into tracking
with 330mm pitch. They are all securely
located into the tracking using
Millennium fittings.
They all have wheels for help
in manouevering the seat around.
The range of Fixed, Removable and
KING Rips secure the wheelchair
using a pedal ratchet system ensuring
the quick and safe securement and
release of wheelchairs.
On all Rips the seat cushion is
completely removed and has a storage
position on the back of the unit.
Some vehicle converters have alternative
cushion storage areas in the vehicle.
Adapter beam accessories are supplied
as standard items.
The adjuster bar is an optional
accessory to be added when ordering.
All Rips come with two off 3 point
lap and diagonal belts with all
age adjusters. (this will stop the
webbing cutting across the passengers
neck)
Two off extension belts (normally
for use with the wheelchair user)
also come as standard. Note: these
need only be used when required
and not necessarily with all passengers.
There are three variants of
seat back available.
Standard back width that is
400mm wide. Narrow
back width that is 280mm at
its narrowest point. ( to
accommodate wheelchairs with
narrow handlebars) Armrests
are not an option. Extending backs (armrests are an option)
|
|
